|
Profiles allow saving a set of application settings in order to use them again. Suppose we need to regularly process photos for two different tasks. E.g., to use them on badges and in questionnaires. Framing setting, image sizes, folders for saving the results and other settings for these tasks will significantly differ. So, in order to avoid changing multiple settings each time, you can create corresponding profiles that contain a set of settings for a separate task in each of them. Then, application settings will be changed by simply switching over the profile.
The tools for working with profiles are located in the Admin main menu and in the Profile side menu.
The following operations can be carried out in the Admin menu:
| • | Update profile in correspondence with the settings of the current application session |
| • | Run Profile Manager which allows the following operations to be carried out: |
| • | Take a look at the existing profiles list |
| • | Take a look at the list of settings for each profile |
| • | Apply the profile to the current application session |
The following operations can be carried out in the Profile side menu:
| • | Take a look at what profile is applied to the current application session |
| • | Change the selected profile |
| • | Reset the profile applied to the current session |
• Take a look at whether the application settings have been changed after applying the profile. You can see an asterisk next to the profile name in the Profile side menu if the settings have been modified.
The contents of the chapter are as follows:
Profile Creation and Setting
Profile Manager
Profile Updating
Working with Profiles from the Side Menu
|