Preview Resolution

Top  Previous  Next

Most cameras pass image to preview with resolution of 320х240 pixels. The info on resolution of the preliminary image passed by the camera is stated in the status bar of inPhoto ID PS, the Original section.

clip1658

The image resolution in the inPhoto ID PS preview depends on the application window size. You can change the resolution in the application preview by changing the window size. Information on the image resolution in the application preview is stated in the status bar of the Current section.

clip1659

In the last but one section of the status bar, there is an indication of the resolution ratio of the image passed by the camera to the image showed in the inPhoto ID PS preview. For example, you may see on the screenshot below that the scale is 200% that means the application preview image is twice larger than the one received from the camera preview.

clip1660

It is important to note that the preview resolution is out of all relation to the shot image resolution. The resolution the camera will make a shot with is stated in the Resolution camera setting, the main menu View -> Camera Settings.

clip1661

It is important to understand that the resolution of the preliminary image received from the camera, the resolution of the image shown in the application preview, the resolution of the image made by the camera and the resolution of the image received as the result of processing, they are four different values.